Blog
Blog Categories
Recent Posts
Blog
1 Working principle of turbine transmitter Turbine flowmeter is composed of turbine, bearing, preamplifier and display instrument. By flow impact turbine blade body, make the turbine to rotate, the tu...
Electromagnetic flowmeter can be divided into three types: integral type, split type and insertion type.Has made explosion-proof certification, was named the jiangsu province technology products, in t...
1, there are some impurities in the medium, the bearing, the shaft to wear, so that the gap between the two increase, the dynamic balance of the moving parts is destroyed, rotational speed decline, or...
Liquid turbine flowmeter mainly adopts single-chip microcomputer technology, is a new type of flow meters and traditional turbine flow sensor and measurement system composed of secondary instrument th...
1. Vortex flowmeter piping design (straight pipe can be required with the same diameter as the requirement for degree, etc.) There are higher requirements for vortex flowmeter with pipeline installati...
Separate electromagnetic flowmeter installation points 1. The sensor of the split-type electromagnetic flowmeter should be installed vertically, and the fluid should flow from bottom to top, so as to ...
Waist wheel flowmeter, also known as roots flowmeter, is used for continuous or intermittent liquid flow in the pipeline measurement of high precision meter.Its structural features are as follows: the...
1. Electromagnetic flowmeters are widely used to measure essentially electrically conductive liquids.Conductivity is simply the ability of a liquid to conduct electricity.The electromagnetic flowmeter...
1. Vibration influence Compressed air air compressor or high pressure fan produced.When these devices are running, they all have varying degrees of vibration, and sometimes the vibration is quite stro...