banner

News

Home News

Particular requirements for installation of metal tube float flowmeters

Particular requirements for installation of metal tube float flowmeters

  • March 16,2020.

An important point of using the metal tube float flowmeter is the installation of the instrument, only the correct installation, and can make sure that there is no external factors around the instrument can interfere with the normal operation of the instrument, in order to ensure the normal operation of the instrument.So for the metal tube float flowmeter, installation process, need to pay attention to what matters, NONCON instrument and you discuss.In order to enable the metal tube float flowmeter to achieve a certain measurement accuracy in the use process, in the installation process, must pay attention to the following points:                                                                                                                                                                                           1. The metal tube float flowmeter should be installed on the process pipeline, and some bypass pipes and bypass valves must be installed next to it. This is also to better replace the flowmeter and clean the pipeline during the inspection and maintenance, which is more convenient for the daily inspection of the metal tube float flowmeter.

2. Install magnetic filter and valve, which can make the presence of magnetic substances in the medium can be successfully filtered out when measuring with the flow meter. If there are solid impurities in the medium, they can also be filtered out when passing through the filter.

3. Install the valve at the exit of the instrument, so as to avoid direct discharge from the exit of the flow meter when the gas flow is measured. If the valve is discharged directly at the exit, it is easy to reduce the pressure, thus resulting in loss of data effect.4. Try to avoid the instrument installed in the place of direct sunlight, which will cause damage to the LCD display instrument, will greatly reduce the service life of the liquid crystal.In a word, the installation of the instrument must be according to the principle and structure of each instrument, choose the right environment and installation skills, from the instrument itself to the installation, never feel how people work comfortable on how to install, that may have a negative impact on the instrument, thus getting a bad result.Jiangsu sanfeng instrument technology co., ltd. is committed to providing customers with satisfactory flowmeter process solutions, selection, quotation, ordering, installation and debugging services.Users in the product order to provide the necessary parameters:, integral or split, caliber, power supply mode, medium, pressure level, temperature, flow range, signal output type, protection level.

quality first, integrity-based, excellent service.Welcome customers to order!

Metal tube float flow meter

© Copyright: 2024 Hubei Nan Kong Instrument Technology Co.,Ltd..All Rights Reserved.

Chat now

Live Chat

    Email us with any questions or inquiries or use our contact data. We would be happy to answer your questions.