Nowadays, turbine flowmeter is widely used in various industries. However, we know that the measuring flow of this kind of instrument requires certain requirements on all aspects of the environment. If we fail to pay attention to it, it will pose certain risks to our workers.

1. Carefully select the installation site of the turbine flowmeter and consider the environmental factors of the installation site.Because be electric equipment, so when installing, must avoid the equipment that has strong electricity, the equipment with high frequency and so on, lest can produce needless magnetic field harm, have danger to the person.Also can not be placed in places and environments with strong acid and alkali, in order to avoid the instrument by clothing damage, causing electrical leakage, the choice of installation place should be relatively large, open, convenient for personnel to check the activities.

2. Since the placement of the straight pipe of the flow meter has certain length requirements, preparations must be made before the placement to ensure that the length of the straight pipe section meets the requirements of the turbine flow meter.

3. The points placed by the flow meter should be concentric with the pipes above and below, and the error should be small enough.

4. The straight pipeline placed by the flow meter shall be equipped with measures to reduce vibration.The flowmeter should not be installed on the pipe with large vibration, especially in the transverse direction.If it is not possible to place, it is recommended to minimize the vibration of the device, can also be added to the vibration pad.

5. Carefully select and screen the pressure point and temperature point of the device.In order to meet the needs of measurement, the staff should measure the pressure and temperature of the pipeline in the vicinity of the flowmeter, and the position should be implemented according to certain requirements.

Related product: ultrasonic flow meter, metal tube float flow meter.