Has low measuring velocity, wide range than the characteristics such as widely used in chemical, steel, coal, mining and metallurgy, oil, petrochemical, paper making, environmental protection, sugar, pharmaceutical, food, water and irrigation, water supply and drainage and dredging port and other fields, can accurately measure all kinds of acid, alkali, salt solution, raw water, cooling water, sewage, slurry, pulp, mud, slurry, pulp, syrup, and various beverages conductive solution volume of fluid and solid liquid two phase flow.

The concrete analysis of sewage flowmeter

Is widely used in metallurgy, electric power, coal, chemical industry, petroleum, transportation, construction, textile, food, medicine, agriculture, environmental protection and People's Daily life and so on each domain of national economy, is the development of industrial and agricultural production, save energy and improve the quality of our products and improve the economic benefit and the management level of the important tools in the national economy occupies an important position.

What should be noted about the installation of sewage flowmeter?

1. Sewage flowmeter should be installed at the lower level of the horizontal pipeline and at the vertical upward place, avoiding installation at the point of the pipeline and the vertical downward place;

2. Sewage flowmeter should be installed at the rising place of pipeline;

3, in the opening of the discharge pipe installation, should be installed in the lower part of the pipe;

4. If the pipe drop exceeds 5m, install the exhaust valve downstream of the sensor;

5. The sewage flowmeter shall install control valve and cut-off valve downstream of the sensor, but not upstream of the sensor;

6, the sensor can not be installed in the inlet and outlet of the pump, should be installed in the outlet of the pump;

7. Installation of electromagnetic flowmeter in the measuring well.

Specific analysis of sewage flowmeter is as follows:

1. Safety: safety rules must be considered when selecting and installing instruments, such as whether the installation environment has explosive threat, etc.

2. Ambient temperature: the change of the environmental thermometer will have a great impact on the electronic components of the instrument and the flow detection part of some instruments;If the flow characteristics are affected by the change of ambient temperature, some pipelines need to be thermally coated.

3. Environmental humidity: if the environmental humidity is increased, the electrical insulation will be reduced and atmospheric corrosion and electrolytic corrosion will be accelerated;If the ambient humidity decreases, it is susceptible to static electricity.Therefore, for the problems caused by humidity, for the possible range of variation, the user should make expectations and verify whether there will be unnecessary problems in the operation of the selected instrument;

4, electrical interference: electrical electromagnetic interference, usually generated in power cables, electrical switches and motors, which is also a source of measurement error.

Sewage flowmeter has lower requirements on measuring medium, wider and wider application range, more and more convenient for intelligent use and more and more silly, the reliability of the product has been greatly improved.