banner

Products

Home Flow meter Electromagnetic Flow Meter LDB Intelligent Type Electromagnetic Flow Meter

New Products

  • Portable Ultrasonic Flow Meter

    TUF Series Portable Ultrasonic Flow Meter The TUF series ultrasonic flow meter utilizes the principle of low voltage and multiple pulsation time difference, adopts the high-precision and ultra-stable differential transmission of double-balanced signals and differential receiving digital detection technology to measure the acoustic wave transmission time in both the downstream and counter-current directions, and calculates the flow rate according to the time difference.It has the characteristics of good stability, small zero drift, high measuring accuracy and high anti-interference of measuring range over wide. more

  • Intelligent Type Flow Meter

    LDB Intelligent Type Electromagnetic Flow Meter The LDB intelligent type electromagnetic flow meter consists of a sensor and a converter. It is based on Faraday's law of electromagnetic induction, which is used to measure the volume flow of conductive liquid with conductivity greater than 5μs/cm. It is an inductive meter for measuring the volume flow of conductive medium. In addition to measuring the volume flow of general conductive liquid, it can also be used to measure the volume flow of strong corrosive liquids such as strong acid and alkali and uniform liquid-solid two-phase suspension liquid such as slurry, pulp and paper pulp. more

  • Thermal Mass Gas Flow Meter

    LKQ Thermal Gas Mass Flow Meter LKQ thermal gas mass flow meter is a mass flow measurement and monitoring meter,which can detect  air, natural gas, hydrogen, oxygen, chlorine, nitrogen and ammonia, ammonia, coal gas, phosgene, flue gas and various chemical mixtures, without pressure and temperature compensation. It can be widely used in petroleum, chemical, metallurgy, electric power, water treatment, paper, food, medicine, cement, textile and various production, scientific research units for process control and gas flow measurement. Widely used in: flow measurement of steel plant, coking plant gas. more

  • Gas Flow Meter

    LLGQ Gas Roots /Waist Wheel Flow Meter The gas roots flowmeter has been used as a volumetric meter for more than 100 years.  With the features such as high precision, wide range, small volume, light weight, convenient installation and maintenance, reliable and durable service life, it is widely used in natural gas, coal gas, air and other gas flowmeters.It is an ideal flowmeter device for urban gas, oilfield chemical, scientific research and other departments at home and abroad. more

  • Gas Turbine Meter

    High Precision Gas Turbine Flow Meter Gas turbine flowmeter is a new generation of high precision, high reliability gas precision measuring meter integrating temperature, pressure, flow sensor and intelligent flow totalizer developed by the advanced technology of flow meter at home and abroad, optimized by theories of gas mechanics, fluid mechanics and electromagnetics, which has excellent low pressure and high pressure metering performance. more

  • Mass Vortex Flow Meter

    LUGK Multi Variable Type Vortex Flow Meter Mass vortex flowmeter, simple to install. Connection mode: flange and clamping connection. It has superior reliability and stability due to no movable part, and the detecting portion has only a simple configuration of the vortex generator. Low pressure loss, no leakage point, and high safety performance. Robust sensor construction for high temperature (up to 3500 ° C), high pressure fluid. more

  • Steam Gas Vortex Flow Meter

    LUGC Steam Gas And Liquid Insert Type Vortex Flow Meter The Insert Type vortex flowmeter is simple in structure and can be made into online installation type.Applicable to large diameter gas, steam flow measurement, etc.Easy installation, no pipe design. more

  • Vortex Flow Meter

    LUGB Flow Instrumentation Vortex Flow Meter The vortex flowmeter is a speed type flow instrument which has a wide range of uses. It is suitable for flow metering, measurement and control of liquids, steam and most gases. more

LDB Intelligent Type Electromagnetic Flow Meter

The LDB intelligent type electromagnetic flow meter consists of a sensor and a converter. It is based on Faraday's law of electromagnetic induction, which is used to measure the volume flow of conductive liquid with conductivity greater than 5μs/cm. It is an inductive meter for measuring the volume flow of conductive medium. In addition to measuring the volume flow of general conductive liquid, it can also be used to measure the volume flow of strong corrosive liquids such as strong acid and alkali and uniform liquid-solid two-phase suspension liquid such as slurry, pulp and paper pulp.

  • Product Origin:

    China
  • Shipping Port:

    Huangpu port
  • Lead Time:

    Spot
  • MOQ:

    1
Product Details

Features

■ Full digital processing, strong anti-interference ability, reliable measurement, high precision, flow measurement range can reach 150:1;

■ Ultra-low EMI switching power supply, large voltage range of suitable power supply, good anti-EMI performance;

■Use 16-bit embedded microprocessor, with fast operation speed, high precision, and programmable low-frequency rectangular wave excitation,improving the stability of flow measurement and low power consumption;

■Use SMD parts and surface mount (SMT) technology, high circuit reliability;

■ No moving parts in the pipe, no flow blocking parts, and there is almost no additional pressure loss in the measurement;

■ It can modify the range online on site according to the actual needs of users;

■The measurement results are independent of the physical parameters such as flow velocity distribution, fluid pressure, temperature, density, viscosity;

■High-definition backlit LCD display, full Chinese menu operation, easy to use, easy to operate, easy to learn and understand;

■With digital communication signal output such as RS485, RS232, Hart and Modbus (optional);

■With self-test and self-diagnosis function;

■ With hourly total recording function, recording the total amount of flow in hours, suitable for time-sharing measurement (optional);

■ There are three Integrators, which can display the forward accumulation amount ,the reverse accumulation amount and the difference calculation amount respectively.. There is an internal power-down clock, which can record 16 power-down times. (optional);

■ With infrared handheld operator, 115KHZ communication rate, it can operate all functions of converter remotely without contact (optional).


Instrument Classification

1.According to the instrument structure, the vortex flowmeter can be divided into three categories, namely:

 ■ Full pipe type electromagnetic flow meter

Full pipe type electromagnetic flow meter

① No resistance parts in the measuring pipe, no pressure loss.

① With simple structure, the electromagnetic flowmeter measuring pipe can use different lining according to different qualifications, and the reliability is high.

■Separate type electromagnetic flowmeter


Separate type electromagnetic flowmeter

The converter and the  main body  are  installed  separately, which  is  convenient  for centralized installation and easy to read data.

■Plug-in type electromagnetic flowmeter


Plug-in type electromagnetic flowmeter

It is widely applicable to the flow measurement of large caliber conductive liquid medium in various industries.

①Wide nominal diameter range, suitable for all caliber pipes between DN150~DN3000.

②The sensor uses novel excitation mode, low power consumption, stable zero point and high precision. The flow range can reach 1500:1


Technical Parameters

(1) Electromagnetic sensors general specifications                                              Table 1

Standard

Nominal diameter (mm)

(Special specifications can be customized)

JB/T 9248-2015

Pipe type PTFE lining: DN10~DN600;

Pipe type rubber lining ink: DN40~DN2200

Plug-in type: DN150~DN3000

Flow direction

Range ratio

Repeatability error

Positive and negative

20:1

±0.1% of the measured value

Accuracy grade

pipe type: 0.5 grade, 1.0 grade; Plug-in: 1.5 grade, 2.0 grade

Measured medium temperature

Normal rubber lining: -20~+60°C

High temperature rubber lining: -20~+90°C

PTFE lining: -30~+100°C

High temperature tetrafluoro lining: -20~+180°C

Rated operating pressure

(high pressure can be customized)

DN10-DN150≤1.6MPa

DN200-DN350≤1.0MPa

DN400-DN1000≤0.6MPa

DN450-DN2200≤0.25MPa

Flow rate range

Conductivity range

0.5-10m/s

The conductivity of the measured fluid is ≥5μs/cm

Signal output

4-20mA (load resistance 0~750Ώ), pulse/frequency, control level

Communication output


Power supply

RS485 communication MODBUS protocol, HART communication interface

220VAC or 24VDC

Required straight pipe length

Upstream ≥5DN, downstream ≥2DN

Connection mode

The flowmeter and the pipe use flange connection, and the flange meets the national standard: GB/T9115.1-2000

Explosion-proof grade

Protection grade

Ambient temperature

Relative temperature

Total power consumption

ExdIICT6

IP65, it can be customized up to IP68

-25~+60℃

5%~95%

Less than 20W


Meter Selection

(1) Product selection                                                                                                 Table 2

Model

Description

LDB-

Full pipe type electromagnetic flowmeter

LDC-

Plug-in type electromagnetic flowmeter

Nominal diameter                       

10-2200mm

Assembly

S

Integrated type

L

Separate  type

Electrode material

M

Stainless steel

T

Ti (titanium)

D

Ta(tantalum)

H

Hastelloy

P

Pt platinum

N

Ni nickel

Output mode

0

No output

1

4-20mA/1-5KHz

2

4-20mA

Lining material

X

Rubber

F

PTFE

P

Polyethylene

J

Polyurethane rubber

Local display

0

No local display

1

Local display

Communication mode

0

No communication

1

RS485 communication (MODBUS protocol)

2

HART communication

3

GPRS wireless communication

Grounding ring

0

Without grounding ring

1

With grounding ring

2

Ground electrode

Upper limit flow

n

Upper limit flow (range) m3/h

Various types of electromagnetic flow meters

Installation Dimension

Flange connection type electromagnetic flow sensor


Separate flange connection type electromagnetic flow sensor

Electromagnetic Flowmeter Installation Precautions

1. Installation location

The pipe must be completely filled with liquid, which is critical, otherwise the flow display will be affected and measurement errors will occur. The pipe structure must be designed to ensure that the flow pipe is always filled with fluid.When the fluid is diverted or combined with solid particulate deposits,vertical installation is recommended, but for vertical installations,it need to follow the fluid direction from bottom to top to ensure that the pipe is full of fluid.

Installation position of electromagnetic flow meter

Avoid air bubbles. If air bubbles enter the flow pipe, the flow display will be affected ,and measurement errors will occur. When the fluid contains air bubbles, the pipe must be designed to prevent air bubbles from accumulating in the flow pipe. If there is a valve near the flow measuring pipe, place the pipe upstream of the valve as much as possible to avoid pressure reduction and bubble generation.

Electromagnetic flowmeter installed to avoid air bubbles

2. Installation direction

If the electrode is perpendicular to the ground, bubbles gathered at the top or deposits deposited at the bottom can cause measurement errors. Install the separate type flow pipe junction box and the integrated type converter on top of the pipe system to prevent water from entering.

3.  Straight pipe Sections Requirements and Environmental Requirements

Do not install anything near the flow pipe that may interfere with the magnetic field, the induced signal voltage, and the flow field distribution of flow pipe. In general,it is necessary to ensure a 5D of straight pipe section for the upstream and a 3D of straight pipe section for the downstream. If there are interference flow parts such as elbows and valves, the length of the straight pipe section required should be larger. It is highly recommended to install the valve at the downstream end to avoid flow fluctuations in the flow pipe and to avoid counting from the empty pipe status.

Installation diagram of electromagnetic flowmeter

4. Maintain stable fluid conductivity

Avoid installing the flowmeter in the position of uneven fluid conductivity. If chemicals are injected near the upstream end of the electromagnetic flowmeter, it may affect the flow display. To avoid this, it is recommended to inject chemicals to the downstream end of the flowmeter. If it must be injected from the upstream end, use a long enough straight pipe (approximately 5D) to ensure that the fluid is well mixed with the chemicals.

A free consultation

Email us with any questions or inquiries or use our contact data. We would be happy to answer your questions.

Related Products
High Precision Electromagnetic Meter
LDR High Precision Electromagnetic Heat Meter

LDR electromagnetic heat meter is designed for the special application of intelligent building distributed energy and heat exchange station, which can directly measure flow and cold and heat. It does not need additional flow totalizer and Pt1000. It is easy to install with low cost. The electromagnetic flow sensor is used as an electromagnetic heat meter for detecting the flow rate of the heat transfer fluid, and has the features of high precision, wide application range, and convenient and simple online calibration.

Electromagnetic Flowmeter Water Meter
LDS High Technology Electromagnetic Water Meter

The LDS electromagnetic water meter is a battery-powered electromagnetic induction water meter which can be installed anywhere without sacrificing accuracy and performance. It does not require the main power supply.It is specifically designed for individual water applications such as water withdrawal, pipe network distribution, metering charges and irrigation. It has intelligent information and high measurement performance, which is easy to install and saves user investment.

Intelligent Type Magnetic Flow Meter
LD Intelligent Type Magnetic Flow Meter

Intelligent electromagnetic flowmeter is composed of sensors and converters.It is based on Faraday's law of electromagnetic induction to work, used to measure the volume flow of conductive material, is a speed meter.

electromagnetic flow meter
China RS485 sewage magnetic liquid milk beer acrylic river electronic flowmeter electromagnetic waste water flow meter price

Product description The LDB intelligent type electromagnetic flowmeter consists of a sensor and a converter. It is based on Faraday's law of electromagnetic induction, which is used to measure the volume flow of conductive liquid with conductivity greater than 5μs/cm. Itis an inductive meter for measuring the volume flow of conductive medium. In addition to measuring the volume flow of general conductive liquid, it can also be used to measure the volume flow of strong corrosive liquids such as strong acid and alkali and uniform liquid-solid two-phase suspension liquid such as slurry, pulp and paper pulp. It is wdely used for flow measurement of petroleum, chemical, metallurgy, textile, papermaking, environmental protection, food and other industrial sectors and municipal management, water conservancy construction, rivers and other fields.

electromagnetic flow meter
Clamp-on sanitary food grade electromagnetic flow meter DN32 beer milk juice water flow meter

The LDB intelligent type electromagnetic flowmeter consists of a sensor and a converter. It is based on Faraday's law of electromagnetic induction, which is used to measure the volume flow of conductive liquid with conductivity greater than 5μs/cm. It is an inductive meter for measuring the volume flow of conductive medium. In addition to measuring the volume flow of general conductive liquid, it can also be used to measure the volume flow of strong corrosive liquids such as strong acid and alkali and uniform liquid-solid two-phase suspension liquid such as slurry, pulp and paper pulp. It is wdely used for flow measurement of petroleum, chemical, metallurgy, textile, papermaking, environmental protection, food and other industrial sectors and municipal management, water conservancy construction, rivers

High Precision Intelligent Type Flow Meter
High Precision Intelligent Type conductive liquids Electromagnetic Flow Meter

Full digital processing, strong anti-interference ability, high reliability and high accuracy. Suitable for almost all conductive liquids. No moving parts, no flow resistance parts, small pressure loss.                                                                              The LDB intelligent type electromagnetic flow meter consists of a sensor and a converter. It is based on Faraday's law of electromagnetic induction, which is used to measure the volume flow of conductive liquid with conductivity greater than 5μs/cm. It is an inductive meter for measuring the volume flow of conductive medium.

electromagnetic flow meter
2021 water electromagnetic flow meter liquid flow sensor

The LDB intelligent type electromagnetic flow meter consists of a sensor and a converter. It is based on Faraday's law of electromagnetic induction, which is used to measure the volume flow of conductive liquid with conductivity greater than 5μs/cm. It is an inductive meter for measuring the volume flow of conductive medium. In addition to measuring the volume flow of general conductive liquid, it can also be used to measure the volume flow of strong corrosive liquids such as strong acid and alkali and uniform liquid-solid two phase suspension liquid such as slurry,pulp and paper pulp. It is widely used for flow measurement of petroleum,chemical,metallurgy,textile,paper making,environmental protection,food and other industrial sectors and municipal management,water conservancy construction, rivers and other fields.

Turbine Type Flow Meter
LWGQ Natural Gas Turbine Flow Meter

This kind of turbine flow meter product does not have the field display function itself, but only transmits the flow signal in the form of pulse signal.The meter is low in price, high in integration, compact in size, especially suitable for use with secondary display instrument, PLC, DCS and other computer control systems.This kind of turbine flowmeter are explosion-proof products, explosion-proof level for: Exd Ⅱ BT6, Exid Ⅱ CT6.

differential pressure transmitter
air water differential pressure transmitter gauge sensor transducer

P30 series pressure/differential pressure transmitters are available in a variety of structural forms and are designed with full isolation circuit technology, which can accurately measure pressure, absolute pressure, differential pressure, flow rate, vacuum degree and liquid level .This product has been widely used in petroleum, chemical industry, metallurgy, electric power, food, papermaking, medicine, machinery manufacturing, scientific experiment and aviation military industry pressure measurement. The P30 series transmitter has been designed with full isolation circuit technology to isolate the power supply and sensor signals, which greatly improves the stability and anti-interference ability of the whole machine.In addition to the three basic functions of adjusting zero position, measuring range and zero pressure fine adjustment of the previous intelligent transmitter, the paper also designs three key combinations on the display to complete online passive migration, set display unit of work, linear/square conversion, set damping time and fixed current output. P30 series transmitters also have the function of parameter data backup and recovery. When data data is damaged, the damaged data can be restored online through three buttons, and the modified data can be immediately backed up.The key function of transmitter can be realized by the communication software or manual operator produced by the company.

Electromagnetic Flowmeter Water Meter
LDS High Technology Electromagnetic Water Meter

The LDS electromagnetic water meter is a battery-powered electromagnetic induction water meter which can be installed anywhere without sacrificing accuracy and performance. It does not require the main power supply.It is specifically designed for individual water applications such as water withdrawal, pipe network distribution, metering charges and irrigation. It has intelligent information and high measurement performance, which is easy to install and saves user investment.

UF 1000 Wall Mounted Ultrasonic Flowmeter
UF 1000 Wall Mounted Ultrasonic Flow Meter

UF 1000 is an economical jet - lag ultrasonic flow meter specially designed for water.Compared with other ultrasonic flow meters on the market, it has the characteristics of high reaction rate, low power consumption and high stability. In addition, it also continues the TGA technology independently researched.

Vortex Flow Meter
LUGB Flow Instrumentation Vortex Flow Meter

The vortex flowmeter is a speed type flow instrument which has a wide range of uses. It is suitable for flow metering, measurement and control of liquids, steam and most gases.

© Copyright: 2021 Hubei Nan Kong Instrument Technology Co.,Ltd..All Rights Reserved.

Chat now

Live Chat

    Email us with any questions or inquiries or use our contact data. We would be happy to answer your questions.