• September 24,2020.

1. Vortex flowmeter piping design (straight pipe can be required with the same diameter as the requirement for degree, etc.) There are higher requirements for vortex flowmeter with pipeline installati...

• October 16,2020.

1, there are some impurities in the medium, the bearing, the shaft to wear, so that the gap between the two increase, the dynamic balance of the moving parts is destroyed, rotational speed decline, or...

• October 16,2020.

Electromagnetic flowmeter can be divided into three types: integral type, split type and insertion type.Has made explosion-proof certification, was named the jiangsu province technology products, in t...

• October 16,2020.

1 Working principle of turbine transmitter Turbine flowmeter is composed of turbine, bearing, preamplifier and display instrument. By flow impact turbine blade body, make the turbine to rotate, the tu...

• December 28,2020.

The porous balance flowmeter is a great improvement on the traditional orifice flow meter and has the remarkable characteristics of balanced rectifier.The traditional throttling device has only one fl...

• January 29,2021.

Vortex flow meter is researched and produced according to Karman vortex flow principle. It is mainly used for flow measurement of industrial pipeline medium fluid, such as gas, liquid, steam and other...

• January 29,2021.

The flow profile of the precession vortex flow sensor is similar to the profile of a Venturi tube (as shown in Fig. 1).A group of spiral guide vanes are placed at the inlet side. When the fluid enters...

• February 26,2021.

Vortex flow meter is a new type of flow meter developed in the seventies. Compared with other forms of flow meters, it has the following advantages: no moving parts inside the meter, simple structure,...

• April 21,2021.

In the industrial production process due to the production needs to measure a small or strong corrosive medium.Corrosion is a phenomenon in which a metal is damaged by chemical action in its environme...

• July 6,2021.

1. The density compensation when the vortex flowmeter measures the steam should be scientific and accurate. In order to measure the mass flow of steam correctly, the change of steam pressure and tempe...

• July 8,2021.

1. The density compensation when the vortex flowmeter measures the steam should be scientific and accurate. In order to measure the mass flow of steam correctly, the change of steam pressure and tempe...

• October 29,2021.

As a flow measuring instrument, vortex flow meter has been used more and more in recent years,which greatly facilitates the supporting application of customers' computers and other digital systems and...