Search
Blog Categories
Recent Posts
I. Classification according to measurement principles (1) Mechanical principle: Instruments belonging to this principle include differential pressure type and rotor type using Bernoulli's theorem;Usin...
Problems are inevitable if your precession vortex gas flowmeter is used for a long time.It is not that the quality of products produced by the manufacturer has problems, no matter what things will hav...
Turbine flowmeter is a kind of economical speed instrument, which has been applied in many occasions. The accuracy of turbine flowmeter is determined under reference conditions (or standard working co...
Vortex flowmeter is sensitive to flow velocity distribution distortion, rotating flow and flow pulsation of the pipeline. Therefore, sufficient attention should be paid to the installation conditions ...
The intelligent electromagnetic flowmeter adopts the embedded technology of single chip microcomputer to realize the digital excitation. Meanwhile, the electromagnetic flowmeter adopts CAN field bus o...
Separate electromagnetic flowmeter installation points 1. The sensor of the split-type electromagnetic flowmeter should be installed vertically, and the fluid should flow from bottom to top, so as to ...
Electromagnetic flowmeter can be divided into three types: integral type, split type and insertion type.Has made explosion-proof certification, was named the jiangsu province technology products, in t...
1 Working principle of turbine transmitter Turbine flowmeter is composed of turbine, bearing, preamplifier and display instrument. By flow impact turbine blade body, make the turbine to rotate, the tu...
The porous balance flowmeter is a great improvement on the traditional orifice flow meter and has the remarkable characteristics of balanced rectifier.The traditional throttling device has only one fl...
The flow profile of the precession vortex flow sensor is similar to the profile of a Venturi tube (as shown in Fig. 1).A group of spiral guide vanes are placed at the inlet side. When the fluid enters...
In the industrial production process due to the production needs to measure a small or strong corrosive medium.Corrosion is a phenomenon in which a metal is damaged by chemical action in its environme...
1. The density compensation when the vortex flowmeter measures the steam should be scientific and accurate. In order to measure the mass flow of steam correctly, the change of steam pressure and tempe...