Search
Blog Categories
Recent Posts
Turbine flowmeter is a kind of economical speed instrument, which has been applied in many occasions. The accuracy of turbine flowmeter is determined under reference conditions (or standard working co...
Vortex flowmeter is sensitive to flow velocity distribution distortion, rotating flow and flow pulsation of the pipeline. Therefore, sufficient attention should be paid to the installation conditions ...
The intelligent electromagnetic flowmeter adopts the embedded technology of single chip microcomputer to realize the digital excitation. Meanwhile, the electromagnetic flowmeter adopts CAN field bus o...
Separate electromagnetic flowmeter installation points 1. The sensor of the split-type electromagnetic flowmeter should be installed vertically, and the fluid should flow from bottom to top, so as to ...
Liquid turbine flowmeter mainly adopts single-chip microcomputer technology, is a new type of flow meters and traditional turbine flow sensor and measurement system composed of secondary instrument th...
1, there are some impurities in the medium, the bearing, the shaft to wear, so that the gap between the two increase, the dynamic balance of the moving parts is destroyed, rotational speed decline, or...
Electromagnetic flowmeter can be divided into three types: integral type, split type and insertion type.Has made explosion-proof certification, was named the jiangsu province technology products, in t...
1 Working principle of turbine transmitter Turbine flowmeter is composed of turbine, bearing, preamplifier and display instrument. By flow impact turbine blade body, make the turbine to rotate, the tu...
The porous balance flowmeter is a great improvement on the traditional orifice flow meter and has the remarkable characteristics of balanced rectifier.The traditional throttling device has only one fl...
The flow profile of the precession vortex flow sensor is similar to the profile of a Venturi tube (as shown in Fig. 1).A group of spiral guide vanes are placed at the inlet side. When the fluid enters...
In the industrial production process due to the production needs to measure a small or strong corrosive medium.Corrosion is a phenomenon in which a metal is damaged by chemical action in its environme...
1. The density compensation when the vortex flowmeter measures the steam should be scientific and accurate. In order to measure the mass flow of steam correctly, the change of steam pressure and tempe...