English
Products
Categories
New Products
Smart gas Roots (waist wheel) flow meter Intelligent gas waist wheel (Roots) flowmeter is a new generation flowmeter that integrates flow, temperature, and pressure detection functions, and can automatically compensate for temperature and pressure. Gas is a compressible fluid, and its volume value is closely related to temperature and pressure. In order to unify standards for both parties, it is necessary to convert the actual volume into a standard volume under reference conditions (101.325 kPa 20°C). In order to achieve this purpose, the smart gas waist wheel flowmeter can accurately correct the volume of gas; it is an ideal instrument for gas measurement in urban gas, petroleum, chemical, electric power, metallurgy and other industries. more
TUF Series Portable Ultrasonic Flow Meter The TUF series ultrasonic flow meter utilizes the principle of low voltage and multiple pulsation time difference, adopts the high-precision and ultra-stable differential transmission of double-balanced signals and differential receiving digital detection technology to measure the acoustic wave transmission time in both the downstream and counter-current directions, and calculates the flow rate according to the time difference.It has the characteristics of good stability, small zero drift, high measuring accuracy and high anti-interference of measuring range over wide. more
LDB Intelligent Type Electromagnetic Flow Meter The LDB intelligent type electromagnetic flow meter consists of a sensor and a converter. It is based on Faraday's law of electromagnetic induction, which is used to measure the volume flow of conductive liquid with conductivity greater than 5μs/cm. It is an inductive meter for measuring the volume flow of conductive medium. In addition to measuring the volume flow of general conductive liquid, it can also be used to measure the volume flow of strong corrosive liquids such as strong acid and alkali and uniform liquid-solid two-phase suspension liquid such as slurry, pulp and paper pulp. more
LKQ Thermal Gas Mass Flow Meter LKQ thermal gas mass flow meter is a mass flow measurement and monitoring meter,which can detect air, natural gas, hydrogen, oxygen, chlorine, nitrogen and ammonia, ammonia, coal gas, phosgene, flue gas and various chemical mixtures, without pressure and temperature compensation. It can be widely used in petroleum, chemical, metallurgy, electric power, water treatment, paper, food, medicine, cement, textile and various production, scientific research units for process control and gas flow measurement. Widely used in: flow measurement of steel plant, coking plant gas. more
LLGQ Gas Roots /Waist Wheel Flow Meter The gas roots flowmeter has been used as a volumetric meter for more than 100 years. With the features such as high precision, wide range, small volume, light weight, convenient installation and maintenance, reliable and durable service life, it is widely used in natural gas, coal gas, air and other gas flowmeters.It is an ideal flowmeter device for urban gas, oilfield chemical, scientific research and other departments at home and abroad. more
High Precision Gas Turbine Flow Meter Gas turbine flowmeter is a new generation of high precision, high reliability gas precision measuring meter integrating temperature, pressure, flow sensor and intelligent flow totalizer developed by the advanced technology of flow meter at home and abroad, optimized by theories of gas mechanics, fluid mechanics and electromagnetics, which has excellent low pressure and high pressure metering performance. more
LUGK Multi Variable Type Vortex Flow Meter Mass vortex flowmeter, simple to install. Connection mode: flange and clamping connection. It has superior reliability and stability due to no movable part, and the detecting portion has only a simple configuration of the vortex generator. Low pressure loss, no leakage point, and high safety performance. Robust sensor construction for high temperature (up to 3500 ° C), high pressure fluid. more
LUGC Steam Gas And Liquid Insert Type Vortex Flow Meter The Insert Type vortex flowmeter is simple in structure and can be made into online installation type.Applicable to large diameter gas, steam flow measurement, etc.Easy installation, no pipe design. more
LUGB Flow Instrumentation Vortex Flow Meter The vortex flowmeter is a speed type flow instrument which has a wide range of uses. It is suitable for flow metering, measurement and control of liquids, steam and most gases. more
The temperature transmitter is generally composed of temperature element, transition lead, insulating tube, protective tube, junction box, fixing device, etc., dividing number Pt100, Cu50 thermistor, and K\N\E\J\T thermocouple.
Product Origin:
ChinaShipping Port:
Huangpu portLead Time:
SpotMOQ:
1■Product application
Table 1
|
Hot resistance |
Thermocouple |
|
Usually used in conjunction with display instruments, recording instruments, electronic calculations, etc.Direct measurement in the process of various production - 200 ℃ ~ 500 ℃ within the scope of liquid, steam and gas medium, as well as solid surface temperature. |
Usually used in conjunction with display instruments, recording instruments, electronic calculations, etc.Directly measuring the range of 0 ℃ ~ 1300 ℃ in the process of producing all kinds of liquid, steam and gas medium, as well as in solid surface temperature. |
■Product features
Table 2
|
Hot resistance |
Thermocouple |
|
Pressure spring type temperature sensor, good vibration resistance; No need to compensate the wire, saving money; High precision of temperature measurement; High mechanical strength, good voltage resistance; Imported thin film resistance components, reliable and stable performance; |
Simple assembly and convenient replacement; No need to compensate the wire, saving money; Large measurement range; High mechanical strength, good voltage resistance;
|
■Product execution standard Table3
|
Hot resistance |
Thermocouple |
|
IEC751 JB/T18622-1997 JB/T8623-1997 |
IEC584 IEC1515 GB/T16839-1997 JB/T5582-91 |
■Technical indicators
Thermal resistance technical index Table4
|
Hot resistance |
Thermocouple |
|
IEC751 JB/T18622-1997 JB/T8623-1997 |
IEC584 IEC1515 GB/T16839-1997 JB/T5582-91 |
Thermocouple specifications Table5
|
Model |
Indexing number |
Tolerance grade |
|||
|
Ⅰ |
Ⅱ |
||||
|
Tolerance values |
Temperature range℃ |
Tolerance values |
Temperature range℃ |
||
|
WZK |
K |
±1.5℃ |
-40~+375 |
±2.5℃ |
-40~+333 |
|
±0.004ltl |
375~1000 |
±0.0075ltl |
333~1200 |
||
|
WZN |
N |
±1.5℃ |
-40~+375 |
±2.5℃ |
-40~+333 |
|
±0.004ltl |
375~1000 |
±0.0075ltl |
333~1200 |
||
|
WZE |
E |
±1.5℃ |
-40~+375 |
±1.5℃ |
-40~+333 |
|
±0.004ltl |
375~800 |
±0.004ltl |
333~900 |
||
|
WZJ |
J |
±1.5℃ |
-40~+375 |
±1.5℃ |
-40~+333 |
|
±0.004ltl |
375~750 |
±0.004ltl |
333~750 |
||
|
WZT |
T |
±1.5℃ |
-40~+125 |
±1 ℃ |
-40~+333 |
|
±0.004ltl |
125~350 |
±0.0075ltl |
133~350 |
||
Table 6
|
Model |
Instructions |
||||||||
|
WZ |
□ |
□ |
□ |
□ |
□ |
□ |
/□ |
/□ |
|
|
Indexing number |
P/ |
|
|
|
|
|
|
|
Pt100 type thermal resistance |
|
C/ |
Cu type thermal resistance |
||||||||
|
K/ |
K type thermocouple |
||||||||
|
N/ |
N type thermocouple |
||||||||
|
E/ |
E type thermocouple |
||||||||
|
J/ |
J type thermocouple |
||||||||
|
T/ |
T type thermocouple |
||||||||
|
Installation mode |
1 |
M27×2 |
|||||||
|
2 |
M20×1.5 |
||||||||
|
3 |
M16×1.5 |
||||||||
|
4 |
G3/4 |
||||||||
|
5 |
G1/2 |
||||||||
|
6 |
Customer designation |
||||||||
|
Probe diameter |
2 |
4mm |
|||||||
|
3 |
6mm |
||||||||
|
4 |
8mm |
||||||||
|
5 |
10mm |
||||||||
|
6 |
12mm |
||||||||
|
7 |
16mm |
||||||||
|
8 |
Customer designation |
||||||||
|
Display mode |
1 |
LCD |
|||||||
|
2 |
LED |
||||||||
|
3 |
Pointer head |
||||||||
|
Explosion-proof grade |
1 |
Not explosion-proof |
|||||||
|
2 |
explosion suppression |
||||||||
|
3 |
Intrinsically safe explosion |
||||||||
|
Output mode |
1 |
4-20mA |
|||||||
|
2 |
0-10mA |
||||||||
|
3 |
0-5V |
||||||||
|
4 |
Customer designation |
||||||||
|
Nominal menstruation |
The pipe that needs to be installed with the temperature transmitter passes through, for example, the DN100 pipe is filled in "100" |
||||||||
|
Measuring range |
The measurement range of a temperature transmitter, for example, 0-100℃ |
||||||||
|
WZP/ |
1 |
2 |
4 |
3 |
1 |
1 |
/200 |
/0-200℃ |
Model instance |
LKC mass flow meter is a special mass flow sensor designed for the measurement of compressed natural gas (CNG). It can be used in any gas feeder, and can also be used as a special sensor for cars or light and heavy vehicles. LKD type mass flow meter is suitable for measuring almost all liquids without solid particles, mainly used in food, petroleum, chemical industry and other industries.
XSR22 Series compensation flow integral Recorder can measure, transform, compensate, calculate, display, record, dump, communication and control the flow with all kinds of sensors and transmitters.
LZ series of metal tube float flowmeter is based on the float position measuring a variable area flow meter, adopts full metal structure, the concept of Modular design, because of its small size small pressure loss, large range than (10:1), installation, maintenance is convenient wait for a characteristic, therefore widely used in various industries are complex, bad environment, low for small flow velocity, the conditions of all kinds of harsh medium flow measurement and process control.
The gas roots flowmeter has been used as a volumetric meter for more than 100 years. With the features such as high precision, wide range, small volume, light weight, convenient installation and maintenance, reliable and durable service life, it is widely used in natural gas, coal gas, air and other gas flowmeters.It is an ideal flowmeter device for urban gas, oilfield chemical, scientific research and other departments at home and abroad.
Are widely used in tap water, heating, water conservancy, metallurgy, chemical industry, machinery and other industries, can be used for production monitoring, contrast, temporary flow test, traffic patrol, traffic detection is the necessary tool instrument, the built-in printer, can realize real-time screen printing, or print set in advance how much more than 20 items of measurement results.
The microwave pulse emitted by the guided wave radar travels along the steel cable or bar and encounters the measured medium. Due to the dielectric constant mutation, the reflection is caused and part of the impulse energy is emitted back.The height of the medium can be measured by the time interval between the transmitted and reflected pulses directly proportional to the distance between the measured medium.
Wall-mounted ultrasonic liquid level difference meter has the characteristics of high accuracy, long life, stability and reliability, easy installation and maintenance, etc.
MF4600 series gas mass flowmeters are produced by microelectromechanical system (MEMS) flow sensor chip independently developed by the company.Suitable for all kinds of clean and dry gases.MF4600 has a rotameter-like air circuit structure, but the flow meter has a clear and intuitive LED display screen, which can display the flow and cumulative total flow in real time.
Preface Ultrasonic open channel flow meter is used for measuring the flow rate in fluid floe in a free surface state with natural flow in a non-full tubular open channel. It is composed of ultrasonic level meter, flume meter and flow integrator. Compared to other pressure type, capacitance type, float type and other traditional measurement methods, Ultrasonic open channel flow meter had absolute advantage that is No-contact the Measure medium. Thus there is no reason for the winding,blockage, leakage, media corrosion, maintenance inconvenience and other shortcomings.
The VTF101 is a light weight, compact and intelligent liquid turbine flow meter that is installed with an internal thread and is used for measuring liquid flow for small pipelines.
The fixed host is divided into two types: fixed one type ultrasonic flowmeter host and fixed split type ultrasonic flowmeter host.
Guided wave radar level gauge can be used in a variety of complex conditions due to the advanced microprocessor and unique choDiscovery echo processing technology. A variety of process connections and the types of detection components make the 60X series guided wave radar level gauge suitable for a variety of complex conditions and applications.Such as: high temperature, high pressure and small dielectric constant medium. The work mode of pulse is adopted, and the radar level of guided wave is extremely low in transmitting power, which can be installed in various metal and non-metal containers, which is harmful to human body and environment.
Room 208,Building E,Jinsheng Creative Park,No.2801 Huangpu east road ,Huangpu district,Guangzhou city,Guangdong province,China
0086 13719278907
+0086-20-32012913
© Copyright: 2026 Hubei Nan Kong Instrument Technology Co.,Ltd..All Rights Reserved.
