English
Products
Categories
New Products
Smart gas Roots (waist wheel) flow meter Intelligent gas waist wheel (Roots) flowmeter is a new generation flowmeter that integrates flow, temperature, and pressure detection functions, and can automatically compensate for temperature and pressure. Gas is a compressible fluid, and its volume value is closely related to temperature and pressure. In order to unify standards for both parties, it is necessary to convert the actual volume into a standard volume under reference conditions (101.325 kPa 20°C). In order to achieve this purpose, the smart gas waist wheel flowmeter can accurately correct the volume of gas; it is an ideal instrument for gas measurement in urban gas, petroleum, chemical, electric power, metallurgy and other industries. more
TUF Series Portable Ultrasonic Flow Meter The TUF series ultrasonic flow meter utilizes the principle of low voltage and multiple pulsation time difference, adopts the high-precision and ultra-stable differential transmission of double-balanced signals and differential receiving digital detection technology to measure the acoustic wave transmission time in both the downstream and counter-current directions, and calculates the flow rate according to the time difference.It has the characteristics of good stability, small zero drift, high measuring accuracy and high anti-interference of measuring range over wide. more
LDB Intelligent Type Electromagnetic Flow Meter The LDB intelligent type electromagnetic flow meter consists of a sensor and a converter. It is based on Faraday's law of electromagnetic induction, which is used to measure the volume flow of conductive liquid with conductivity greater than 5μs/cm. It is an inductive meter for measuring the volume flow of conductive medium. In addition to measuring the volume flow of general conductive liquid, it can also be used to measure the volume flow of strong corrosive liquids such as strong acid and alkali and uniform liquid-solid two-phase suspension liquid such as slurry, pulp and paper pulp. more
LKQ Thermal Gas Mass Flow Meter LKQ thermal gas mass flow meter is a mass flow measurement and monitoring meter,which can detect air, natural gas, hydrogen, oxygen, chlorine, nitrogen and ammonia, ammonia, coal gas, phosgene, flue gas and various chemical mixtures, without pressure and temperature compensation. It can be widely used in petroleum, chemical, metallurgy, electric power, water treatment, paper, food, medicine, cement, textile and various production, scientific research units for process control and gas flow measurement. Widely used in: flow measurement of steel plant, coking plant gas. more
LLGQ Gas Roots /Waist Wheel Flow Meter The gas roots flowmeter has been used as a volumetric meter for more than 100 years. With the features such as high precision, wide range, small volume, light weight, convenient installation and maintenance, reliable and durable service life, it is widely used in natural gas, coal gas, air and other gas flowmeters.It is an ideal flowmeter device for urban gas, oilfield chemical, scientific research and other departments at home and abroad. more
High Precision Gas Turbine Flow Meter Gas turbine flowmeter is a new generation of high precision, high reliability gas precision measuring meter integrating temperature, pressure, flow sensor and intelligent flow totalizer developed by the advanced technology of flow meter at home and abroad, optimized by theories of gas mechanics, fluid mechanics and electromagnetics, which has excellent low pressure and high pressure metering performance. more
LUGK Multi Variable Type Vortex Flow Meter Mass vortex flowmeter, simple to install. Connection mode: flange and clamping connection. It has superior reliability and stability due to no movable part, and the detecting portion has only a simple configuration of the vortex generator. Low pressure loss, no leakage point, and high safety performance. Robust sensor construction for high temperature (up to 3500 ° C), high pressure fluid. more
LUGC Steam Gas And Liquid Insert Type Vortex Flow Meter The Insert Type vortex flowmeter is simple in structure and can be made into online installation type.Applicable to large diameter gas, steam flow measurement, etc.Easy installation, no pipe design. more
LUGB Flow Instrumentation Vortex Flow Meter The vortex flowmeter is a speed type flow instrument which has a wide range of uses. It is suitable for flow metering, measurement and control of liquids, steam and most gases. more
The XSN intelligent flow control instrument is combined with the vortex street and the sensor of the turbine pulse signal to control the flow quantitatively.
Product Origin:
ChinaShipping Port:
Huangpu portLead Time:
SpotMOQ:
1Instrument characteristics
●The error is less than 0.2%F.S, and the function of adjusting and digital filtering can help to reduce the error of the sensor;
●Effectively improve system measurement and control accuracy;
●Flow Sensor for Pulse output;
●3-point switch input for startup, recovery, and zero for each cumulative value;
●1 point control output for valve control cycle 0.02 seconds;
●The 7 - segment line operation can reduce the nonlinear error of flow sensor;
●Instantaneous flow by hour or by minute unit of measurement can choose.
Model specification
Table 1
|
content |
Code and instructions |
|||||||||
|
XSN/ |
|
|||||||||
|
Installation dimensions |
A-— |
160（W）×80(H)×115(L) |
||||||||
|
Panel form |
H |
Horizontal type |
||||||||
|
Display mode |
L |
8 digit cumulative display, display range 0~99999999, decimal point floating 6 digit instantaneous display, display range 0~999999, decimal point floating |
||||||||
|
Input signal |
1 |
Single pulse input |
||||||||
|
Control output |
T1 |
1-point control output |
||||||||
|
External control input |
K3 |
Start, stop, clear / start, |
||||||||
|
External power supply |
B1 |
External supply 12VDC, error less than ±5%, 50mA (flow channel power supply) |
||||||||
|
Communication interface |
S0 |
No communication interface |
||||||||
|
S1 |
RS232 interface |
|||||||||
|
S2 |
RS485 interface |
|||||||||
|
Instrument power supply |
V0 |
220V AC |
||||||||
|
V3 |
Other |
|||||||||
XSJ series flow integrator works with various flow sensors and transmitters to complete the measurement, transformation, transmission and control of instantaneous flow and carry out the cumulative calculation at the same time.
XSJB series thermal energy integrator is an intelligent instrument designed to give full play to the advantages of digital technology and software technology.
XSR22 Series compensation flow integral Recorder can measure, transform, compensate, calculate, display, record, dump, communication and control the flow with all kinds of sensors and transmitters.
XSR30/XSR70 paperless recorder is composed of LCD screen, key, ARM microprocessor, main board, main power supply, external power supply, intelligent channel board, large capacity FLASH, etc.
■Water and sewage treatment pump room, collecting well, biochemical reaction tank, sedimentation tank, etc. ■Food industry winery, granary, food materials filling tanks, etc. ■Electricity, mine mortar pool, coal slurry tank, butter storage tank, stockyard or part of mobile equipment control, etc. ■The control system is used together.
Ⅰ. .Overview The split-type ultrasonic material (liquid) level meter is a kind of convenient and applicable split-type ultrasonic material level meter developed by our company after years of production experience and drawing on the advantages of many similar products. It has the advantages of accurate measurement, reliable work and generous appearance.
MF4600 series gas mass flowmeters are produced by microelectromechanical system (MEMS) flow sensor chip independently developed by the company.Suitable for all kinds of clean and dry gases.MF4600 has a rotameter-like air circuit structure, but the flow meter has a clear and intuitive LED display screen, which can display the flow and cumulative total flow in real time.
MF series In-line mass flow meters is specially designed for all kinds of management and control of industrial gases.It can be used for gas measurement in beverage and food industry and gas measurement and control in other industries, such as special gas monitoring in metallurgy industry, hydrogen flow monitoring in chemical industry, oxygen, nitrogen, helium, argon and compressed air monitoring in the production process.
■No moving parts, never wear ■It has self-diagnostic function ■Both hot and cold, the data can be stored for 18 months
The temperature transmitter is generally composed of temperature element, transition lead, insulating tube, protective tube, junction box, fixing device, etc., dividing number Pt100, Cu50 thermistor, and K\N\E\J\T thermocouple.
Full digital processing, strong anti-interference ability, high reliability and high accuracy. Suitable for almost all conductive liquids. No moving parts, no flow resistance parts, small pressure loss. The LDB intelligent type electromagnetic flow meter consists of a sensor and a converter. It is based on Faraday's law of electromagnetic induction, which is used to measure the volume flow of conductive liquid with conductivity greater than 5μs/cm. It is an inductive meter for measuring the volume flow of conductive medium.
LWGY series turbine flow meter is a very popular product that produced by our company. It is a new generation of turbine flow meters which has absorbed the advanced technology of flow meter at home and abroad, and is manufactured according to JB/9246-199 standard. It has the characteristics of simple structure, light weight, high precision, good reproducibility, high responsiveness, easy installation and maintenance.
Room 208,Building E,Jinsheng Creative Park,No.2801 Huangpu east road ,Huangpu district,Guangzhou city,Guangdong province,China
0086 13719278907
+0086-20-32012913
© Copyright: 2025 Hubei Nan Kong Instrument Technology Co.,Ltd..All Rights Reserved.
