English
Products
Categories
New Products
Smart gas Roots (waist wheel) flow meter Intelligent gas waist wheel (Roots) flowmeter is a new generation flowmeter that integrates flow, temperature, and pressure detection functions, and can automatically compensate for temperature and pressure. Gas is a compressible fluid, and its volume value is closely related to temperature and pressure. In order to unify standards for both parties, it is necessary to convert the actual volume into a standard volume under reference conditions (101.325 kPa 20°C). In order to achieve this purpose, the smart gas waist wheel flowmeter can accurately correct the volume of gas; it is an ideal instrument for gas measurement in urban gas, petroleum, chemical, electric power, metallurgy and other industries. more
TUF Series Portable Ultrasonic Flow Meter The TUF series ultrasonic flow meter utilizes the principle of low voltage and multiple pulsation time difference, adopts the high-precision and ultra-stable differential transmission of double-balanced signals and differential receiving digital detection technology to measure the acoustic wave transmission time in both the downstream and counter-current directions, and calculates the flow rate according to the time difference.It has the characteristics of good stability, small zero drift, high measuring accuracy and high anti-interference of measuring range over wide. more
LDB Intelligent Type Electromagnetic Flow Meter The LDB intelligent type electromagnetic flow meter consists of a sensor and a converter. It is based on Faraday's law of electromagnetic induction, which is used to measure the volume flow of conductive liquid with conductivity greater than 5μs/cm. It is an inductive meter for measuring the volume flow of conductive medium. In addition to measuring the volume flow of general conductive liquid, it can also be used to measure the volume flow of strong corrosive liquids such as strong acid and alkali and uniform liquid-solid two-phase suspension liquid such as slurry, pulp and paper pulp. more
LKQ Thermal Gas Mass Flow Meter LKQ thermal gas mass flow meter is a mass flow measurement and monitoring meter,which can detect air, natural gas, hydrogen, oxygen, chlorine, nitrogen and ammonia, ammonia, coal gas, phosgene, flue gas and various chemical mixtures, without pressure and temperature compensation. It can be widely used in petroleum, chemical, metallurgy, electric power, water treatment, paper, food, medicine, cement, textile and various production, scientific research units for process control and gas flow measurement. Widely used in: flow measurement of steel plant, coking plant gas. more
LLGQ Gas Roots /Waist Wheel Flow Meter The gas roots flowmeter has been used as a volumetric meter for more than 100 years. With the features such as high precision, wide range, small volume, light weight, convenient installation and maintenance, reliable and durable service life, it is widely used in natural gas, coal gas, air and other gas flowmeters.It is an ideal flowmeter device for urban gas, oilfield chemical, scientific research and other departments at home and abroad. more
High Precision Gas Turbine Flow Meter Gas turbine flowmeter is a new generation of high precision, high reliability gas precision measuring meter integrating temperature, pressure, flow sensor and intelligent flow totalizer developed by the advanced technology of flow meter at home and abroad, optimized by theories of gas mechanics, fluid mechanics and electromagnetics, which has excellent low pressure and high pressure metering performance. more
LUGK Multi Variable Type Vortex Flow Meter Mass vortex flowmeter, simple to install. Connection mode: flange and clamping connection. It has superior reliability and stability due to no movable part, and the detecting portion has only a simple configuration of the vortex generator. Low pressure loss, no leakage point, and high safety performance. Robust sensor construction for high temperature (up to 3500 ° C), high pressure fluid. more
LUGC Steam Gas And Liquid Insert Type Vortex Flow Meter The Insert Type vortex flowmeter is simple in structure and can be made into online installation type.Applicable to large diameter gas, steam flow measurement, etc.Easy installation, no pipe design. more
LUGB Flow Instrumentation Vortex Flow Meter The vortex flowmeter is a speed type flow instrument which has a wide range of uses. It is suitable for flow metering, measurement and control of liquids, steam and most gases. more
Product Origin:
ChinaItem NO.:
LKC ~ DN20Shipping Port:
HuangpuColor:
SilverLead Time:
14 working daysPayment:
TTMOQ:
1Price:
$3076.9/setMarket Price:
$3076.9Price Range:
1-3/3076.9$The product is suitable for measuring almost all fluids without solid particles, mainly used in petroleum, chemical, food, environmental protection and other
industries. The implementation standard is:
JJG 897-1995 Verification regulation of mass flow meter
JJG 1038-2008 Verification regulation of mass flow meter
The use of special explosion-proof leakage measurement sensor, real-time monitoring of CNG leakage and early warning;Adopt high pressure
stainless steel metal shell to realize double protection of leakage;
The transmitter adopts frequency domain digital signal processing technology, high precision, good stability, high precision real-time medium
mass flow and density calculation; Solve the problems of time drift and temperature drift;And at the same time with current, pulse, digital
The patented technology of coupling vibration isolation is used to make the product insensitive to on-site vibration interference and highly
adaptable.
Equipped with integrated transmitter, easy to install, no straight pipe section requirements, whether in the upstream or downstream of the
sensor, fully compatible with similar foreign products.
We are a professional Flow Meter factory who worked in this field for 18 years. Our customers are from different countries and cooperating with us steadily.
We are ready to provide you qualified products, professional knowledge and responsible service. I wish you reply me more details about your demand and
parameters such as medium, temperature, pressure ,flow range, diameter etc., so that I will provide you accurate offer and solutions. Welcome to contact
me for more information.
Thank you!
Lky mass flow meter, a patented product developed by our factory, is an advanced high-precision mass flow measuring instrument.Due to its excellent performance, it has high measurement accuracy, low requirements on fluid state and small pressure loss.Coriolis force ( coriolis force ) meters of various specifications can directly obtain the mass, volumetric flow rate, density and temperature of the liquid or slurry to be measured without manual calculation or estimation.
LKC mass flow meter is a special mass flow sensor designed for the measurement of compressed natural gas (CNG). It can be used in any gas feeder, and can also be used as a special sensor for cars or light and heavy vehicles. LKD type mass flow meter is suitable for measuring almost all liquids without solid particles, mainly used in food, petroleum, chemical industry and other industries.
Food hygiene turbine Flow meter suitable for: pharmaceutical industry: physiological saline, glucose water and other infusion products filling and metering; Food and beverage industry: vegetable juice, beer, refined oil and other liquid food filling and metering.
XSJB series thermal energy integrator is an intelligent instrument designed to give full play to the advantages of digital technology and software technology.
P208 type pressure transmitter sensor adopted the advanced technology of microprocessor automatic linear error and temperature compensation, to ensure the long-term reliability of the product and quality, the circuit part in die casting aluminum shell external coating (blue) of epoxy resin, the signal transmitting module using the transient voltage protection circuit, ensure the harsh surge voltage can work normally in the environment, as well as the mechanical load is large in use for a long time also has long service life. Widely used in process control; Liquid level measurement; Boiler control; Environmental control;Metallurgy; Petrochemicals; Hydroelectric power; Process pressure measurement in medicine and food industry and process control pressure measurement in flameproof industry.
LWGQ Gas Turbine Flowmeter is an instrument that can measure temperature, volume, flow sensing and intelligent flow integrator all in one. Ithas a good performance of low pressure and high pressure measurement, also has a variety of signal output modes and lowsensitivity to fluid disturbances. It isused in natural gas, coal gas, liquefied gas, light hydrocarbon gas and gas metering. It isLow price, high integration, small size, especially suitable forusing in conjunctionwith secondary display, PLS, DCS and other computer control systems.
AM1000 Series MEMS Environmental Meter is made by microelectromechanical system (MEMS) flow sensor chip independently developed by our company, which can be applied to HVAC system, wind speed measurement at tuyere, through risk control system, wind tunnel and other places.The sensor integrates wind speed sensor, humidity sensor and temperature sensor, and the accuracy is within ±5.0% FS. It is recommended to be used in pipelines with DN150mm or above.
LC series oval gear flow meter is a direct reading accumulative meter. It is a volumetric Flow meter that measures the summation of liquid flow through the pipeline. Can be widely used in petroleum, chemical, medical and health departments of the flow measurement.
UF200 is a full function handle transfer time ultrasonic flow meter. No matter you want to quickly verify the flow reading of another meter or to data log flow system values over an extended time period, the UF200 is the suitable tool.
UF2200 is a functional handle transfer time ultrasonic flow meter. It is suitable for online calibration and inspection measurement of liquid flow in various industrial sites. The handheld ultrasonic flow meter is with high precision, high consistency, battery power supply, simple operation. It's easy to carry, small size, light weight, the true sense of portable ultrasonic flow meter.
LUXQ series intelligent precession vortex flowmeter can be widely used in industries such as petroleum, chemical, electric power, metallurgy, urban gas supply to measure various gas flows, which is the first choice for oil and gas transmission and metering and trade measurement.
• Flow Range: FS8001:(0~500)sccm;FS8003:(0~6)SLPM • Accuracy: ± (2+0.5FS) • Repeatability: ± 1.0 • Output: Linear:analog voltage0.5~4.5VDC/I²C • High sensitivity • Low pressure drop • Miniature design for easy installation
Room 208,Building E,Jinsheng Creative Park,No.2801 Huangpu east road ,Huangpu district,Guangzhou city,Guangdong province,China
0086 13719278907
+0086-20-32012913
© Copyright: 2025 Hubei Nan Kong Instrument Technology Co.,Ltd..All Rights Reserved.
