banner

Products

Home Flow meter Liquid Turbine Flow Meter LWGM Micro Type Liquid Turbine Flow Meter

New Products

  • Gas Roots (waist wheel) flow meter

    Smart gas Roots (waist wheel) flow meter Intelligent gas waist wheel (Roots) flowmeter is a new generation flowmeter that integrates flow, temperature, and pressure detection functions, and can automatically compensate for temperature and pressure. Gas is a compressible fluid, and its volume value is closely related to temperature and pressure. In order to unify standards for both parties, it is necessary to convert the actual volume into a standard volume under reference conditions (101.325 kPa 20°C). In order to achieve this purpose, the smart gas waist wheel flowmeter can accurately correct the volume of gas; it is an ideal instrument for gas measurement in urban gas, petroleum, chemical, electric power, metallurgy and other industries. more

  • Portable Ultrasonic Flow Meter

    TUF Series Portable Ultrasonic Flow Meter The TUF series ultrasonic flow meter utilizes the principle of low voltage and multiple pulsation time difference, adopts the high-precision and ultra-stable differential transmission of double-balanced signals and differential receiving digital detection technology to measure the acoustic wave transmission time in both the downstream and counter-current directions, and calculates the flow rate according to the time difference.It has the characteristics of good stability, small zero drift, high measuring accuracy and high anti-interference of measuring range over wide. more

  • Intelligent Type Flow Meter

    LDB Intelligent Type Electromagnetic Flow Meter The LDB intelligent type electromagnetic flow meter consists of a sensor and a converter. It is based on Faraday's law of electromagnetic induction, which is used to measure the volume flow of conductive liquid with conductivity greater than 5μs/cm. It is an inductive meter for measuring the volume flow of conductive medium. In addition to measuring the volume flow of general conductive liquid, it can also be used to measure the volume flow of strong corrosive liquids such as strong acid and alkali and uniform liquid-solid two-phase suspension liquid such as slurry, pulp and paper pulp. more

  • Thermal Mass Gas Flow Meter

    LKQ Thermal Gas Mass Flow Meter LKQ thermal gas mass flow meter is a mass flow measurement and monitoring meter,which can detect  air, natural gas, hydrogen, oxygen, chlorine, nitrogen and ammonia, ammonia, coal gas, phosgene, flue gas and various chemical mixtures, without pressure and temperature compensation. It can be widely used in petroleum, chemical, metallurgy, electric power, water treatment, paper, food, medicine, cement, textile and various production, scientific research units for process control and gas flow measurement. Widely used in: flow measurement of steel plant, coking plant gas. more

  • Gas Flow Meter

    LLGQ Gas Roots /Waist Wheel Flow Meter The gas roots flowmeter has been used as a volumetric meter for more than 100 years.  With the features such as high precision, wide range, small volume, light weight, convenient installation and maintenance, reliable and durable service life, it is widely used in natural gas, coal gas, air and other gas flowmeters.It is an ideal flowmeter device for urban gas, oilfield chemical, scientific research and other departments at home and abroad. more

  • Gas Turbine Meter

    High Precision Gas Turbine Flow Meter Gas turbine flowmeter is a new generation of high precision, high reliability gas precision measuring meter integrating temperature, pressure, flow sensor and intelligent flow totalizer developed by the advanced technology of flow meter at home and abroad, optimized by theories of gas mechanics, fluid mechanics and electromagnetics, which has excellent low pressure and high pressure metering performance. more

  • Mass Vortex Flow Meter

    LUGK Multi Variable Type Vortex Flow Meter Mass vortex flowmeter, simple to install. Connection mode: flange and clamping connection. It has superior reliability and stability due to no movable part, and the detecting portion has only a simple configuration of the vortex generator. Low pressure loss, no leakage point, and high safety performance. Robust sensor construction for high temperature (up to 3500 ° C), high pressure fluid. more

  • Steam Gas Vortex Flow Meter

    LUGC Steam Gas And Liquid Insert Type Vortex Flow Meter The Insert Type vortex flowmeter is simple in structure and can be made into online installation type.Applicable to large diameter gas, steam flow measurement, etc.Easy installation, no pipe design. more

  • Vortex Flow Meter

    LUGB Flow Instrumentation Vortex Flow Meter The vortex flowmeter is a speed type flow instrument which has a wide range of uses. It is suitable for flow metering, measurement and control of liquids, steam and most gases. more

LWGM Micro Type Liquid Turbine Flow Meter

The LWGM series micro type liquid turbine flowmeter is a special flowmeter designed to measure small flows using the principle of turbines.It is extremely accurate, especially under high temperature and high pressure conditions. It is also integrated with a electronic pulse generator to maintain ±1% accuracy and ±0., 25% repeatability under long-term continuous operation. Due to the dexterous structural design, no precipitation is formed during operation, so the operation of the meter is “clean”.

  • Product Origin:

    China
  • Shipping Port:

    Huangpu port
  • Lead Time:

    Spot
  • MOQ:

    1
Product Details

Features

■Small flow design, it can identify minimum recognition of 2.1L/h.

■ It can be used to measure, regulate, and distribute liquids including industrial, chemical, petroleum, and commercial coffee machines.


Technical Parameters

                                                                                                                                   Table 1

Measurement range

Caliber

Minimum flow

Maximum flow

Meter factor

1.1mm

2.1 L/h

90 L/h

0.487

1.2mm

3.06L/h

108 L/h

0.543

1.4mm

5.04 L/h

138 L/h

0.625

1.5mm

5.58L/h

150 L/h

0.697

Pressure range

Maximum 20.0bar

Temperature range

-10°C/+100°C

Accuracy level

±1%

Repeatability

±0.25%

Pipe connection

G1/4 internal thread (it can be customized based on customer requirements)

Material

Housing Green Brass(lead-free copper)

INO×18/8( 1.4305 ) stainless steel for bearing

PVDF (polyvinylidene fluoride) with two magnets for the turbine

Magnet SrFeO ceramic, ultrasonic welding

Sealed MVQ (silicon rubber"O" ring)

Installation method

Horizontal installation

Dimensions

(L×B×H ) 55×40×47mm

Weight

About 300g

Certification

NSFCE


Instrument selection

                                                                                                                                    Table 2

Moder

Explain

LWGM-

Instrument caliber

1

1.1mm

2

1.2mm

3

1.4mm

4

1.5mm

Signal output mode

1

Three-wire pulse

2

Two-wire system4-20mADC

Display mode

1

Normalized formNo field display

2

Field display type (liquid crystal)

Explosion-proof grade

1

Normalized formNo explosion proof

2

Flameproof typeExd IICT6

A free consultation

Email us with any questions or inquiries or use our contact data. We would be happy to answer your questions.

Related Products
Turbine Flow Meter
High Precision New Generation Of Liquid Turbine Flow Meter

This series of turbine flowmeters is a new generation of turbine flowmeters, which absorbs the advanced technology of domestic and foreign flowmeters and is manufactured in accordance with jb/9246-199 standard.It is characterized by simple structure, light weight, high precision, good reproducibility, strong responsiveness and convenient installation and maintenance.

Plug In Type Turbine Flow Meter
LWGC Plug In Type Liquid Turbine Flow Meter

LWGC (tangential) and LWCB (axial) plug-in type turbine flow sensors are matched with display meters to form a plug-in type turbine flow meter, which can be widely used for measurement of large caliber pipeline source water, circulating water, clean water and other liquid flows and total amount.

Sanitary Type Liquid Turbine Flow
LWGS Sanitary Type Liquid Turbine Flow Meter

LWGS series sanitary type turbine flowmeter is a flowmeter meter that can be widely used in pharmaceutical, food, beverage and other industries for applications of metering, batching, control, finished product filling.

Food Hygiene Turbine Flow Meter
LWGS Food Hygiene Turbine Flow Meter

Food hygiene turbine Flow meter suitable for: pharmaceutical industry: physiological saline, glucose water and other infusion products filling and metering; Food and beverage industry: vegetable juice, beer, refined oil and other liquid food filling and metering.

Precise Liquid Flow Meter
LWGH High Pressure Type Liquid Turbine Flow Meter

LMGH series high pressure type liquid turbine flowmeter is a special high pressure flowmeter which is designed for high pressure fluid industry such as hydraulic equipment, engineering machinery, chemical industry, etc. The outer housing is made of stainless steel, with simple structure,optimized structure, and high pressure butt flange clamping or high pressure threaded connection.

Liquid Turbine Flow Meter
LWGY Series Liquid Turbine Flow Meter

1. High-definition LCD display; 2. Three-key parameter setting and debugging; 3.5-segment polyline correction function for non-linear signals ; 4. Linear current output; 5. Frequency pulse output: DC power can be used to supply power to the pulse output circuit. At this time, the meter can convert the mV pulse signal output by the turbine sensor into a standard TTL pulse,which can be used for linear signal users debugging.

Insertion Type Turbine Flow Meter
LWGC Insertion Type Turbine Flow Meter

LWGC (tangential) and LWCB (axial) plug-in type turbine flow sensors are matched with display meters to form a plug-in type turbine flow meter, which can be widely used for measurement of large caliber pipeline source water, circulating water, clean water and other liquid flows andtotal amount.

Liquid Turbine Flow Meter
2023 LWGY Liquid Turbine Flow Meter

LWGY series turbine flow meter is a very popular product that produced by our company. It is a new generation of turbine flow meters which has absorbed the advanced technology of flow meter at home and abroad, and is manufactured according to JB/9246-199 standard. It has the characteristics of simple structure, light weight, high precision, good reproducibility, high responsiveness, easy installation and maintenance.

Vortex Flow Meter
LUGB Flow Instrumentation Vortex Flow Meter

The vortex flowmeter is a speed type flow instrument which has a wide range of uses. It is suitable for flow metering, measurement and control of liquids, steam and most gases.

pressure transmitter
wireless vaccum 4~20mA pressure Transducer water air oil pressure sensor digital air differential pressure sensor transmitter

P208 type pressure transmitter sensor adopted the advanced technology of microprocessor automatic linear error and temperature compensation, to ensure the long-term reliability of the product and quality, the circuit part in die casting aluminum shell external coating (blue) of epoxy resin, the signal transmitting module using the transient voltage protection circuit, ensure the harsh surge voltage can work normally in the environment, as well as the mechanical load is large in use for a long time also has long service life. Widely used in process control; Liquid level measurement; Boiler control; Environmental control;Metallurgy; Petrochemicals; Hydroelectric power; Process pressure measurement in medicine and food industry and process control pressure measurement in flameproof industry.

Gear Flow Meter
LC Digital Oval Gear Flow Meter

LC series oval gear flow meter is a direct reading accumulative meter. It is a volumetric Flow meter that measures the summation of liquid flow through the pipeline. Can be widely used in petroleum, chemical, medical and health departments of the flow measurement.

Thermal Mass Gas Flow Meter
LKQ Thermal Gas Mass Flow Meter

LKQ thermal gas mass flow meter is a mass flow measurement and monitoring meter,which can detect  air, natural gas, hydrogen, oxygen, chlorine, nitrogen and ammonia, ammonia, coal gas, phosgene, flue gas and various chemical mixtures, without pressure and temperature compensation. It can be widely used in petroleum, chemical, metallurgy, electric power, water treatment, paper, food, medicine, cement, textile and various production, scientific research units for process control and gas flow measurement. Widely used in: flow measurement of steel plant, coking plant gas.

© Copyright: 2024 Hubei Nan Kong Instrument Technology Co.,Ltd..All Rights Reserved.

Chat now

Live Chat

    Email us with any questions or inquiries or use our contact data. We would be happy to answer your questions.