wireless vaccum 4~20mA pressure Transducer water air oil pressure sensor digital air differential pressure sensor transmitter

PT pressure or differential pressure transducer adopts advanced technology, safe and reliable, high precision and pulse transmission;It is widely used in the measurement of pressure parameters of industrial pipelines.

It has high reliability, no pollution, stable performance, don't have to contact industrial media can meet the requirements of most of the material level measurement, so as to thoroughly solve the pressure type, capacitance type, float type of traditional measurement methods such as winding, jam, leaking, corrosion medium, safeguard the disadvantages such as inconvenience, thus can be widely used in water and sewage pump room, collecting well, biochemical reaction tank, tank, electric power, coal mine slurry pool, the slurry pool, butter, tanks, stocking yard or part of a mobile device control wineries, food industry, grain, food material containing tank, etc.

P30 series pressure/differential pressure transmitters are available in a variety of structural forms and are designed with full isolation circuit technology, which can accurately measure pressure, absolute pressure, differential pressure, flow rate, vacuum degree and liquid level .This product has been widely used in petroleum, chemical industry, metallurgy, electric power, food, papermaking, medicine, machinery manufacturing, scientific experiment and aviation military industry pressure measurement. The P30 series transmitter has been designed with full isolation circuit technology to isolate the power supply and sensor signals, which greatly improves the stability and anti-interference ability of the whole machine.In addition to the three basic functions of adjusting zero position, measuring range and zero pressure fine adjustment of the previous intelligent transmitter, the paper also designs three key combinations on the display to complete online passive migration, set display unit of work, linear/square conversion, set damping time and fixed current output. P30 series transmitters also have the function of parameter data backup and recovery. When data data is damaged, the damaged data can be restored online through three buttons, and the modified data can be immediately backed up.The key function of transmitter can be realized by the communication software or manual operator produced by the company.

PT series products adopt imported silicon pressure sensor and high performance CPU processor technology, with unique temperature and linear compensation technology. Based on the world's advanced, mature and reliable capacitive sensor technology, PT series products are elaborately designed with the combination of advanced monolithic computer technology and sensor digital conversion technology.

The LDB intelligent type electromagnetic flow meter consists of a sensor and a converter. It is based on Faraday's law of electromagnetic induction, which is used to measure the volume flow of conductive liquid with conductivity greater than 5μs/cm. It is an inductive meter for measuring the volume flow of conductive medium. In addition to measuring the volume flow of general conductive liquid, it can also be used to measure the volume flow of strong corrosive liquids such as strong acid and alkali and uniform liquid-solid two-phase suspension liquid such as slurry, pulp and paper pulp.

■No moving parts, never wear ■It has self-diagnostic function ■Both hot and cold, the data can be stored for 18 months

The TUF series ultrasonic flow meter utilizes the principle of low voltage and multiple pulsation time difference, adopts the high-precision and ultra-stable differential transmission of double-balanced signals and differential receiving digital detection technology to measure the acoustic wave transmission time in both the downstream and counter-current directions, and calculates the flow rate according to the time difference.It has the characteristics of good stability, small zero drift, high measuring accuracy and high anti-interference of measuring range over wide.

XSJB series thermal energy integrator is an intelligent instrument designed to give full play to the advantages of digital technology and software technology.

UF2900 series correlation in ultrasonic heat meter with the ultrasonic "method of time difference" as the principle, USES the completely independent research and development, production has a strict production process, perfect detection means, set a number of patents, to overcome all the problems, the water quality is poor and poor installation environment product performance is stable, reliable and accurate measurement products accord with the standard (heat meter CJ128-2007).

The LF2600 series liquid flow sensor adopts the MEMS flow sensor technology and sensor packaging technology of Guangzhou Nan Kong Automation Equipment Co.,Ltd., which integrates the thermal flight time (TOF) and thermal sensing principles.

The FS7002 mass flow rate/anti-blockage sensor is made by using the microcomputer electrical system (MEMS) flow sensor chip independently developed by our company, which is suitable for cleaning and drying gases of various general purposes.Unique packaging technology enables it to measure flow in different ranges under the same pipe diameter, mass production to ensure high reliability, high performance and low cost.

AM1000 Series MEMS Environmental Meter is made by microelectromechanical system (MEMS) flow sensor chip independently developed by our company, which can be applied to HVAC system, wind speed measurement at tuyere, through risk control system, wind tunnel and other places.The sensor integrates wind speed sensor, humidity sensor and temperature sensor, and the accuracy is within ±5.0% FS. It is recommended to be used in pipelines with DN150mm or above.